PRODUCT

INGESCO ESE lightning rod, in compliance with UNE 21186 and NF C-17 102 standards.

HOW IT WORKS?

The specific purpose of the INGESCO lightning rod is to produce ionization directed at the cloud, so that any possible electrical discharge can be channelled from the very beginning. Between the exciter set, which has the same potential as the surrounding air, and on the other hand, the point and the deflector set, which are both at earth potential, a potential difference is stablished. This potential difference will be greater, the higher the atmospheric potential gradient is, and consequently, when the lightning formation is most likely.

PROTECTION LEVELS

UNE 21186 and NF C-17 102 standards provide an evaluating method, as a result of several studies of lightning
protection systems. It compares the early streamer time ( t) induced by an INGESCO ESE lightning rod, to a simple
Franklin type lightning rod in the same environmental and placement test conditions.

A relationship between time, propagation speed and, in consequence, the stroke distance and the protection zone,
is obtained in determining the value.

The evaluation of the risk of being struck and the structure's protection needs is obtaining following the Appendix B of the standards mentioned above. likely.

CHARACTERISTICS AND ADVANTATGES

• -100% effective in dealing with discharge
• -Electrical continuity guaranteed. Carries lightning current without resistance
• -NON- Electronic lightning rod ensuring its long life
• -Technical qualities remain unaffected after each strike
• -With NO Electronics, so there is no risk of melting
• -NO External Power supply is required
• -Ensuring its effective operation after each lightning strike.
• -NO special MAINTENANCE is needed.

TECHNICAL SPECIFICATION

The INGESCO lightning rod is manufactured according to the following technical specifications:

* It has a double early streamer emission device:

• an early streamer device
• an electroatmospheric condenser

* Materials:

• Main structure made of stainlees steel AISI 316
• Deflector set made of EPOXY resine

Ensuring its effective operation whatever conditions are.

STANDARDS AND REGULATIONS

• UNE 21.185 Standard
• UNE 21.186 Standard
• NF C-17 102 Standard
• 1024-1 CEI Standard

INSTALLATION PROCESS

Our company strictly recommends following the International Standards (UNE 21186 and NF C-17 102) to install our INGESCO lightning rods.

CERTIFICATES AND PATENTS POSSESSED BY INGESCO ESE

Manufactured since 1984, the INGESCO lightning rod is the first NON Electronic Early Emission Streamer lightning rod which is in compliance with UNE 21186 and NF C-17 102 Standards.

PATENTS:

• - Industrial Registry Nº 150032. Ministry of Industrie and Energy
• - Function development patent Nº: 526.264.

TESTS:

• - Evaluation Test of Air Terminals equipped with an early Streamer Emission device (ESE) . L.C.O.E. (Laboratorio Central Oficial de Electrotecnia- Central Official Elechtrotechnical Laboratory) Ministerio de Industria y EnergÌa (España)
• - Evaluation Tests of Air Terminals equipped with an early Streamer Emission device (ESE) . LABELEC (Electrotechnical Laboratory - Spain)
• - Test of High Tension Wave Intensity 10/350 (Lightning Wave). Guarantee of running Continuity after 100 KA Current Impulses. BET (High Tension Laboratory- Germany)
• - Certificate of Guarantee of INGESCO EARLY STREAMER EMISSION AIR TERMINALS Insulation (Air Terminals conforming to UNE 21186). LGAI (Laboratori General d'Assaigs i Investigacions - Test and Investigations General Laboratory - Bellaterra - Spain)
• - INGESCO EARLY STREAMER EMISSION AIR TERMINALS homologation certificate by Telefonica España, SA